TeamCapri
Tech, Repairs, Upgrades => Capri XR-2 89-94 => Topic started by: Heavensheros on December 11, 2009, 05:31:00 AM
-
there is the oil pressure sensor to install an oil pressure gauge,
the engine temp sensor to install temp guage,
-
misplaced?
-
mistyped...
Where is the engine temp sensor and where is the Oil pressure sensor i am installing a temperature and oil pressure gauge and dont know where the sensors are.
-
ahh, on back on the block near firewall....
nut the ECU should need that signal to work so you can just remove them normally.
i normally get a oil filter adapter or relocation kit
http://shop.edoperformance.com/greddy-oil-relocation-kit-miata-8993-p-3977.html (http://shop.edoperformance.com/greddy-oil-relocation-kit-miata-8993-p-3977.html)
allows you add sensors to it and keep the factory signals going to the computer
i am sure there are mush cheaper ones out there. that was the first one i seen on google. :D
you can get just the adapter for about 50 or so
-
thnx... decided that im not going to install gauges
-
the stock ones are very inaccurate ..
i would recommend instumentation to anyone modding a car....
-
Agree, cost and hassle is well worth it in the end