TeamCapri

Tech, Repairs, Upgrades => Capri XR-2 89-94 => Topic started by: Heavensheros on December 11, 2009, 05:31:00 AM

Title: gauges
Post by: Heavensheros on December 11, 2009, 05:31:00 AM

there is the oil pressure sensor to install an oil pressure gauge,

the engine temp sensor to install temp guage,

Title: gauges
Post by: Gostlrs on December 11, 2009, 11:12:00 AM

misplaced?

Title: gauges
Post by: Heavensheros on December 11, 2009, 05:31:00 PM

mistyped...

Where is the engine temp sensor and where is the Oil pressure sensor  i am installing a temperature and oil pressure gauge and dont know where the sensors are.

Title: gauges
Post by: Gostlrs on December 12, 2009, 02:02:00 AM

ahh, on back on the block near firewall....


nut the ECU should need that signal to work so you can just remove them normally.

i normally get a oil filter adapter or relocation kit

http://shop.edoperformance.com/greddy-oil-relocation-kit-miata-8993-p-3977.html (http://shop.edoperformance.com/greddy-oil-relocation-kit-miata-8993-p-3977.html)

allows you add sensors to it and keep the factory signals going to the computer

i am sure there are mush cheaper ones out there. that was the first one i seen on google.  :D  

you can get just the adapter for about 50 or so

Title: gauges
Post by: Heavensheros on December 13, 2009, 06:27:00 AM

thnx... decided that im not going to install gauges

Title: gauges
Post by: rcicustoms on December 14, 2009, 12:47:00 AM

the stock ones are very inaccurate ..
 i would recommend instumentation to anyone modding a car....

Title: gauges
Post by: Gostlrs on December 14, 2009, 01:07:00 PM

Agree, cost and hassle is well worth it in the end