TeamCapri

Tech, Repairs, Upgrades => Non-Capri Usable Car Parts => Topic started by: Gaz on June 19, 2015, 05:07:20 PM

Title: Mercury Capri Door Jam Alignment Receiver
Post by: Gaz on June 19, 2015, 05:07:20 PM
Does anybody know the interchange for the female receptacle? Or if anyone is selling one?
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: Gaz on March 27, 2016, 09:31:06 PM
Alright, so here's what I'm gonna do. I'm going to 3d print a few of these out of Carbon/plastic or ABS, and wondering if any of you lot would want any. If my original ones broke, somebody else has to be having the same issue.
 Any interest in these?
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: WashiestSnake on March 27, 2016, 10:50:24 PM
Id be interested, I wouldn't make one for me right now as cash is abit low atm. The thing id like to know about is the durability of it being its 3d printed.
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: Gaz on March 28, 2016, 09:34:06 AM
Supposedly, the carbon material is as strong as steel or better. I'll be testing them in my own vehicle.
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: rsharry on March 28, 2016, 11:17:48 AM
Does anybody know the interchange for the female receptacle? Or if anyone is selling one?

Send me a picture of exactly what you are looking for. I think i know what you mean but better tonsend me a picture. I have lot of parts and a car for brake out.
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: Gaz on March 28, 2016, 11:40:42 AM
Don't have a pic at the moment. When you are looking at the door jamb, there is the striker, and the latch. There is also a small plastic piece , approximately 2x2", that mates inside it's counterpart on the body side. They are secured with two T25 head body bolts, with spacers between them and the door/body. The body side piece is that to which I'm referring.

Please move this thread to Parts for Sale.
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: rsharry on March 28, 2016, 12:39:45 PM
Ok. Tomorrow i will look for it. I will take some pictures so you can have a look at it. If you need some more parts write me. I have a lot of parts from braking out capris. Xr2 and n/a
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: 94daves on March 28, 2016, 09:31:18 PM
Is this the piece?  I'm looking for one, too.  On the driver side, though I think both sides are interchangeable. 

(http://i925.photobucket.com/albums/ad99/94daves/IMG_1023_zpsxelyj66m.jpg) (http://s925.photobucket.com/user/94daves/media/IMG_1023_zpsxelyj66m.jpg.html)
Title: Re: Mercury Capri Door Jam Alignment Receiver
Post by: Gaz on March 29, 2016, 01:08:03 PM
That's the one. How's the one on the door look? Yes, they are interchangeable between sides.