TeamCapri

General => Build Threads => Topic started by: WashiestSnake on June 09, 2016, 02:07:42 AM

Title: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on June 09, 2016, 02:07:42 AM
PLANS:
Body Modifications
-94 Tailights
-1991 Mustang GT Sideskirts customized to fit the Capri
-Clubsprint Front End
-Aftermarket Seats
-Big Bang Sport 77s in 16x8
-Rear Seat Delete(Complete)
-Roll Bar(Functional)
-Strut Tower Brace
-Mustang SVO Steering Wheel or Stock GTX Wheel
-94 Black Interior(Excluding Dash)
-Fender Bracing
-Chassis Bracing
-Coil-Overs(Not sure on brand)
-Big Brake Kit
-Fender Flares
-Stock Premium Stereo
-Four Point Harness(Color Matched To Interior)


Engine/Driveline Modifications
-BP 2.0L Flyin' Miata with A-Beam Rods Stroker kit
-Cryo and Shot Peened GTX Trans/Swap
-93 Miata VLSD
-Jackson Racing Supercharger Kit
-Megasquirt 3
-Port, and Polished Head
-GTX Box Intake
-3 Inch Exhaust Side Pipe


WHATS BEEN DONE SO FAR:
-Interior Clean(Originally was smoked in)
-Ford Badges replacing Mercury Badges
-1993 XR-2 Spoiler(Had to be repaired, and painted, it came from a Green 93) Yet to be installed
-New Battery
-Front Respray(Done by me, I eventually will get a professional full respray done)
-Front End Bumper and Header panel work(Required 40 hours of body work, still not perfect)
-Rear Seat, And Convertible Top Removed
-Chassis Bracing(Front, and Rear Strut Tower bars, Lower Arm Bar)
-1994 Tail Lights
-1994 Sun Visors
-1994 Center Console
-Rear Seat Delete Made
-1994 Door Panels
-BP05 Engine Picked Up (needs rebuild)
-Big Brake Kit Assembled(Needs install)
- New Alternator
- New Heater Core Hoses
- New Struts

NOTE: I'm new to car mods please help! ANY advice/guidance will be taken more than likely.
UPDATED- For ease of readability
Title: Re: WashiestSnakes Build/Update Thread
Post by: CapriTypeR on June 09, 2016, 11:19:33 PM
Sounds like you have a pretty good handle on it!  Keep it up!
Title: Re: WashiestSnakes Build/Update Thread
Post by: greywolf27030 on June 10, 2016, 10:20:25 AM
Can't wait for the pictures.

Jack
Title: Re: WashiestSnakes Build/Update Thread
Post by: azgtx on June 10, 2016, 11:12:51 PM
Which year GTX are you looking for?
Title: Re: WashiestSnakes Build/Update Thread
Post by: WashiestSnake on June 11, 2016, 03:09:20 AM
Which year GTX are you looking for?
Just looking for a BF, plan is to do a swap on the Capri that's why I'm looking for a thrashed one I don't wanna  ruin a good car. I just want to get the AWD Bits in tact/rust free. I could care less about the shell. I'm also not looking soon, I plan to do it sometime later this year moneys tight currently.
Title: Re: WashiestSnakes Build/Update Thread
Post by: WashiestSnake on June 11, 2016, 03:45:30 AM
Also first set of pictures along with explanations of what has been done will be up tomorrow, currently downloading to my Flickr account so I can get them on here.
Title: Re: WashiestSnakes Build/Update Thread
Post by: azgtx on June 11, 2016, 08:25:12 PM
Check with Jim Chittenden in Saugerties NY. He has a GTX that he is parting..your side of the country. You can find him on the Yahoo GTX group  s1elise190 is his screen name.
Title: Re: WashiestSnakes Build/Update Thread
Post by: azgtx on June 11, 2016, 08:27:09 PM
Also..most guys that are parting GTX's are doing so because they are rusted out.
Title: Re: WashiestSnakes Build/Update Thread
Post by: WashiestSnake on June 12, 2016, 09:12:03 PM
Also..most guys that are parting GTX's are doing so because they are rusted out.
Ive seen that the shells rust out really bad, does the rust end up affecting the subframe/AWD components, or is that rare? Also thanks for all the support everyone, you guys are amazing! I'm currently having problems with Flickr.
Title: Re: WashiestSnakes Build/Update Thread
Post by: WashiestSnake on July 05, 2016, 07:10:30 PM
Alright I just picked up my new clutch from the parts strore and called my mechanic for a qoute to replace it, ive been qouted 280, so I have to say thats a great deal. id replace the clutch myself but i currently dont have the tools(missing breaker bar, full socket set, and a good set of jack stands)  :-\

in other news my pc just shit out, so no pictures untill my car is fixed, maybe next week Waiting for Russ to get back to me.
Title: Re: WashiestSnakes Build/Update Thread
Post by: WashiestSnake on July 17, 2016, 01:37:51 AM
Just got my computer back, sadly I wasnt able to recover my files. I now will have to dig through my phones to get any pictures of the work I did. In other news in 2 weeks ill have my car back, and I will take pictures then.
Quick question how do you clean a engine bay? My engine bay looks terrible atm.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on August 12, 2016, 07:02:44 PM
Removed Convertible Top and the rear seat today. Took me 3 hours, it was a real doozy. The hardest part was getting my hardtop off, I had to fight with my rear middle top bolt.

Also im sick of waiting on my mechanic, can one of you give me a walkthrough on how to replace the clutch on my n/a. Give me a full idea of all the tools, and the steps needed. I have an idea on how to do it, but I want to make sure im right.

Update: I was able to complete the clutch change using my Workshop Manual!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on September 02, 2016, 07:32:31 PM
Huge news! Im in negotiations for a 87 GTX with a drivetrain. I should have it by next month if everything goes through!  ;D  8)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: NomakeWan on September 06, 2016, 08:02:05 AM
Woah, holy snap, congratulations! Here's hoping it all works out! 8)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 03, 2016, 03:30:10 PM
Update GTX sale is proceding according to plan! Will update once its in my possesion!  :D
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 06, 2016, 09:30:25 PM
Do you guys want more of a write up on my GTX swap, or just small pics here and there showing stuff as I go?
Id like go know what you guys would like, so I can make a high quality build thread like DarkAngels!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on October 07, 2016, 07:44:27 AM
Definitely vote for a detailed write up.  Inspire us...

Jack
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 11, 2016, 03:45:51 PM
Definitely vote for a detailed write up.  Inspire us...

Jack
Alright, Ill buy a nice camera before I start tearing the GTX apart.

Lol I hope I inspire atleast someone.

I really dont recommend buying a good running GTX, im only doing it this way because Im getting everything I need for a steal!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 13, 2016, 03:09:58 PM
Update: Car should be here next week, I plan to start tearing it apart next weekend.
@AZGTX any tips when im wrenching on it?
Title: Go for it, build looks awesome !
Post by: DarkAngel on October 13, 2016, 06:05:36 PM
Do you guys want more of a write up on my GTX swap, or just small pics here and there showing stuff as I go?
Id like go know what you guys would like, so I can make a high quality build thread like DarkAngels!

Firstly... wow, thanks for the complimentary remark.

And if you want my 2 cents... Just go with whatever you feel is appropriate as  your build develops. It would be interesting as a reader to map your progress as you are experiencing it, including your thoughts on the build, aspirations aswell as Journaling the actual work done and pics of progress... in other words, keep up the good work  :)

Your planned build is awesome  8),  you've put a lot of really cool and stylish ideas into your plans and I'm looking forward to monitoring your progress.

Regards,
Title: Re: Go for it, build looks awesome !
Post by: WashiestSnake on October 13, 2016, 08:55:09 PM
Do you guys want more of a write up on my GTX swap, or just small pics here and there showing stuff as I go?
Id like go know what you guys would like, so I can make a high quality build thread like DarkAngels!

Firstly... wow, thanks for the complimentary remark.

And if you want my 2 cents... Just go with whatever you feel is appropriate as  your build develops. It would be interesting as a reader to map your progress as you are experiencing it, including your thoughts on the build, aspirations aswell as Journaling the actual work done and pics of progress... in other words, keep up the good work  :)

Your planned build is awesome  8),  you've put a lot of really cool and stylish ideas into your plans and I'm looking forward to monitoring your progress.

Regards,
Thanks that really helped my spirits! I do have to say you're build thread is so inspiring to me. It also sets a really high mark that I hope to follow!

This build is gonna take quite awhile, if I complete it in the next two years ill be amazed. My main problem is finding the time, and lack of a second car currently. Once I get something that is suitable as a daily I plan on starting the AWD swap, but that doesnt mean I wont still be doing updates on here... I still have other things planned that should be coming soon!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on October 13, 2016, 10:29:35 PM
I'm curious about the 16x8 rims, check out the tyre size for a link to an online wheel / tyre fitment calculator...

235 45 16 (http://www.willtheyfit.com/index.php?width=195&aspect=50&diameter=15&wheelwidth=6.5&offset=40&width2=235&aspect2=45&wheel_size=16&wheel_width=8&offset2=20#isPage=1) +20 offset, sticks out about 3.9 cm or 1.53 inches from outer rim for stock tyres, with inside rim fit.

You'd need flares for that... awesome !
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 14, 2016, 05:11:54 PM
I'm curious about the 16x8 rims, check out the tyre size for a link to an online wheel / tyre fitment calculator...

235 45 16 (http://www.willtheyfit.com/index.php?width=195&aspect=50&diameter=15&wheelwidth=6.5&offset=40&width2=235&aspect2=45&wheel_size=16&wheel_width=8&offset2=20#isPage=1) +20 offset, sticks out about 3.9 cm or 1.53 inches from outer rim for stock tyres, with inside rim fit.

You'd need flares for that... awesome !
Yup thats exactly why I chose the size of 16x8, I believe the Capri really could use fender flares plus it goes along with the Factory RS model i'm envisioning.
Also if helps with grip, so it lessens the amount of strain ill put the gearbox through.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on October 14, 2016, 07:42:34 PM
Helps with drifting too
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 14, 2016, 08:28:52 PM
Helps with drifting too
Im pretty sure the sustained high rpm/ torque of drifting would explode the GTX transmission its that weak, but I do think it would be awesome till that happened   ;)

Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: chrispoe on October 15, 2016, 05:39:31 PM
I'm curious about the 16x8 rims, check out the tyre size for a link to an online wheel / tyre fitment calculator...

235 45 16 (http://www.willtheyfit.com/index.php?width=195&aspect=50&diameter=15&wheelwidth=6.5&offset=40&width2=235&aspect2=45&wheel_size=16&wheel_width=8&offset2=20#isPage=1) +20 offset, sticks out about 3.9 cm or 1.53 inches from outer rim for stock tyres, with inside rim fit.

You'd need flares for that... awesome !

Those tires/offsets are going to leave you with a undesirable  positive scrub radius.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on October 15, 2016, 05:54:38 PM
Uhuh... I figured some custom widening (cutting) of the wheel arch under the flares would probably be required.

That's one of those do or die mods... kudos to washiestsnake for going all in to get a custom look.

Edit: I'm thinking the front wheel arch is the problem when turning... maybe go for 16x7's for the front and 16x8's for the rear
Title: Tragedy Strikes
Post by: WashiestSnake on October 15, 2016, 09:34:32 PM
Well it looks like I might not be getting the GTX afterall, I currently live with my parents and they're in a tight spot right now finacially. They've asked me to help out. My money for the GTX is now going to them unless the owner is understanding enough to wait a month so I can recoupe from this.  :'(

If I cant get this car Ill be forced to buy from other GTX owners meaning it will put the AWD swap out that much longer. I really hope it wouldnt come to this...
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on October 15, 2016, 09:51:19 PM
Well...

How about a sausage sizzle or bikini car wash to raise some money ?

Maybe you could write a letter to Mr. TRUMP asking for money...
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 15, 2016, 10:04:24 PM
Well...

How about a sausage sizzle or bikini car wash to raise some money ?

Maybe you could write a letter to Mr. TRUMP asking for money...
Lol I wish, unless I was to sell drugs I wouldnt get the money in time. The plan was to have the payment sent by Tuesday. I will try to call tomorrow and will update with results.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on October 15, 2016, 11:52:37 PM
Good to see you laugh.

Money comes and goes, family is more important... there are plenty of rusty old GTX's out there. Perhaps you haven't found the right one yet...

Edit: I saw a FWD GTX turbo for sale over here... I thought they were all AWD
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on October 18, 2016, 08:12:11 PM

Edit: I saw a FWD GTX turbo for sale over here... I thought they were all AWD

The GT are FWD turbo sedan... the GTX are AWD turbo hatch. If it's not one of the two, it's mislabeled, or a conversion. I don't think it's any different in AU
Title: Update
Post by: WashiestSnake on October 19, 2016, 07:42:42 PM
Update: Contact Pending
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 20, 2016, 04:13:14 PM
Awesome news, he is letting me have another month!
Can't wait for it to get here!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on October 20, 2016, 05:29:06 PM
Cool... that's a bonus  :)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 02, 2016, 06:12:15 PM
I finally found the set of wheels Id like, I plan on getting then after I get the GTX.
(http://i.ebayimg.com/images/g/Kf4AAOSwOyJX8yXq/s-l500.jpg)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on November 03, 2016, 07:53:53 AM
Nice
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 05, 2016, 09:58:05 PM
Currently working on photoshoping a concept of my car, hopefully it should be done sometime this week.
Also does anyone know how to color match objects in Photoshop?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: CapriTypeR on November 07, 2016, 01:06:04 AM
Awesome news, he is letting me have another month!
Can't wait for it to get here!

Wow!! Sounds like a great guy!! Maybe you should slip him some extra cash for his patience! I bet he'd let you slide for as long as you needed to, if he was willing to wait this long!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: CapriTypeR on November 07, 2016, 01:08:19 AM
Currently working on photoshoping a concept of my car, hopefully it should be done sometime this week.
Also does anyone know how to color match objects in Photoshop?
I learned photoshop by searching YouTube for how-to videos.....type in "color match in Photoshop xxxxx"....make xxxxx whatever version you have.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on November 07, 2016, 05:11:47 PM
Awesome news, he is letting me have another month!
Can't wait for it to get here!

Wow!! Sounds like a great guy!! Maybe you should slip him some extra cash for his patience! I bet he'd let you slide for as long as you needed to, if he was willing to wait this long!
The guy who sold me the B6T donor car has been waiting since July, with just a $100 deposit... I did however sweeten the deal offerring him the install job as he is a turbo mechanic...

Btw: nice rims... I use a streamlined version of photoshop on my Samsung Galaxy tablet... what do you need to color match?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 07, 2016, 06:07:52 PM
I'm trying to color match the hood scoop, and a side scoop. Mostly just a test to see if I like them, im about to go back to college for paint/body restoration classes in January, so if Im gonna dream im dreaming big.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 07, 2016, 08:04:04 PM
(http://i.imgur.com/oB6ejMR.jpg)
Couldnt find a Clubsprint,or XR-2 in a good side shot so excuse the awful job this is my first time photoshopping.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 11, 2016, 06:07:53 PM
Sending money for the GTX on Monday, should have it next weekend hopefully.
Once I get the GTX I wont be able to do anything with it for a few months(School/Moving)
Edit: Forgot to say im staying with B6, and plan on turboing it after I buy and install my Megasquirt.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 15, 2016, 03:28:26 PM
GTX has been payed for, it should be coming the 3 or 4th of December.
Once I have it I will be documenting the whole tear down.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 25, 2016, 06:20:32 PM
    Alright small update im getting new headlights for the RS. Im getting projectors since this is a slight restomod. I dont plan on going overboard with the modern
 updates though.
   The plan is to make everything look factory so im going back to the stock radio, and getting a Ford SVO steering wheel. The GTX is coming with its stock steering wheel so I might use that. Id like opinions on which steering wheel is better. Also while its still kinda warm I have to repaint the trim around the car. The plan is to eventualy take  off the body trim once i get the Clubsprint bumpers. I then plan on filling the space left from the sidetrim with fiberglass so I can have more room for my widebody kit.

Also huge props to Russ for keeping the GTX so long for me. I couldn't do any of this without him!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 30, 2016, 08:27:33 PM
Update I bought the 1994 Premium Stereo System from Ron, Ill be installing that this weekend. Hopefully the previous owner used a stock radio to new headunit adapter I really dont want to cut and re-splice everything back to the factory connector.
Once I have time this weekend, ill take pictures inside and out of my car for you guys to see!

-Update On the GTX Russ is busy this weekend, and will be busy moving so I wont be able to get it till around March at the latest. I actually am happy about this as it keeps me out of the cold while I rip the parts out.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 02, 2016, 04:48:56 PM
Update- Just got back from a junkyard it took me 3 hours but all I could find was Kia Sephias with the BP that had 250-300k miles. All the Escort GTs had there heads and intakes taken allready leaving a unusable motor.  :-\
I really hope I can find one around my location.
-Change of plans Im going to upgrade my b6 to Megasquirt 2 then use the wiring harness on the BP once I get it. This helps me skip having to get a XR-2 wire harness and having to deal with compatibility issues.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on December 03, 2016, 04:44:56 PM
www.car-part.com is the engine swapper's friend
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 05, 2016, 05:42:49 PM
www.car-part.com is the engine swapper's friend
Awesome, sadly alot of the engines are more than 100 miles away ughhh. The good thing is they're cheap, guess ill have to plan a weekend around this.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on December 06, 2016, 10:44:57 AM
I drove 23 hours in two days to get my XR2 the other week and drove to WV twice last summer to get parts, and Ohio to get a tranny..

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 16, 2016, 02:12:25 PM
Just had some nasty thoughts of using a FE3 motor. Considering the BF chassis got the FE3 it should be a pretty straight forward swap, and considering its larger displacement then the BP it could potentially be a much better motor then the stroker. The best part is theres one in my junkyard I saw without knowing. What are you guys' opinion?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on December 16, 2016, 04:37:54 PM
I had looked at that engine also, but wondered about how well it would fit because it was installed in the later model 323.

Jack Byd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 16, 2016, 07:14:32 PM
What i had seen in my quikj research was that the FE3 was installed in South African 1986-1989 model 323s. I wish I could find more on how they got it to fit.

 In other news ive been working polishing and detailing my car and so far its turning out great.  I still need to repaint the trim and wetsand the front end but once thats done my car will look amazing.

  Also im going on a 8hr car cruise so if i disappear permanently there was a car race and my driver lost control. I have no plans of getting into a car race just wanted to give everyone a heads up.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on December 18, 2016, 05:03:57 PM
Pretty sure the FE3 uses a different bolt pattern, I think there is a gtype that came mated to the F2 engines in the 626/probe that will work with it, possibly need to do a differential swap to get the right axles to work.

Will not mate to the GTX awd transmission
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 18, 2016, 07:48:19 PM
Do you think there would be a way to get the FE3 to mount to a GTX tranny?
Im guessing id have to get a bellhousing adapter right?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on December 18, 2016, 09:57:30 PM
Do you think there would be a way to get the FE3 to mount to a GTX tranny?
Im guessing id have to get a bellhousing adapter right?

Pretty much.
You'd be better off with a different (stronger) transmission then

FE3 is taller/longer than BP AFAIK and may pose some fitment challenges
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 25, 2016, 03:37:08 PM
Currently buying some suspension bits to stiffen up the car, while i'm at it I have to get a new alternator. Once I have them installed and tested ill release a overview and installation guide!  8)
Does anyone know if we(US) got any AWD 626s, and if so what transmission is it?
Update: Only had enough money to buy a Front Strut Bar, and Front Lower Arm Bar. Once I get payed again ill be buying a 19mm Sway Bar, and Rear Lateral Bar. Im  also in need of a XR-2 front sway bar, being as my car is only a N/A.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 27, 2016, 05:38:06 PM
Currently buying some suspension bits to stiffen up the car, while i'm at it I have to get a new alternator. Once I have them installed and tested ill release a overview and installation guide!  8)
Does anyone know if we(USA) got any AWD 626s, and if so what transmission is it?
Update: Only had enough money to buy a Front Strut Bar, and Front Lower Arm Bar. Once I get payed again ill be buying a 19mm Sway Bar, and Rear Lateral Bar. Im  also in need of a XR-2 front sway bar, being as my car is only a N/A.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: chrispoe on December 27, 2016, 08:15:58 PM
Does anyone know if we(US) got any AWD 626s, and if so what transmission is it?

The AWD 626 was never sold in North America, only in Europe, While Japan and I think New Zealand got it under the Capella name.

The tranny is a G-series and is very similar to the BG GTX. The 626 tranny basically differs by having a bolt pattern for the F-series engines and a shorter 1st, 5th, and final drive ratio.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 30, 2016, 04:39:53 PM
Just got my strutbar installed!  Handling in the Capri is now a dream torque steer is gone, along with the nasty body roll I was having.  Rocketmans construction is great and the hardware included was high quality!  I can allready tell the RS is going to be a great track car once I get the rest of the bracing! 
Title: Capri RS Build
Post by: WashiestSnake on December 31, 2016, 12:56:13 PM
Here is my long awaited pics. Any thoughts or tips, other then repainting the front trim.
Im getting rid of the stripes in favor of a single peice of vinyl on the hood bulge.
Before:
(http://i1376.photobucket.com/albums/ah28/michael_hall14/IMG_03281_zps2qbe6ymm.jpg)
(http://i1376.photobucket.com/albums/ah28/michael_hall14/IMG_03241_zpslp8ilaky.jpg)
(http://i1376.photobucket.com/albums/ah28/michael_hall14/24571562404_73af7a5e75_o_zpswfcp25uc.jpg?t=1483229323)
After:
(http://i1376.photobucket.com/albums/ah28/michael_hall14/IMG_20161219_120149_zpsnbljwf5l.jpg?t=1483229320)
(https://c4.staticflickr.com/1/510/31890229491_c23d2a4397_o.jpg)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on January 01, 2017, 06:57:26 PM
Updated with before and after transformation. These pictures are from when I first got the car, and were taken on a really old phone so forgive the quality. Its easy to say my Capri was in awful shape before I got ahold of it.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on January 02, 2017, 09:47:21 AM
Like I said, nice work.  Love the wheels.  Got a suggestion for you.  Paint the red strip in the side trim yellow, yellow calipers and kangaroo shields on the front fenders.  And I don't like yellow.  Came up with that for my red car, but now I've got a white car so the red works.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on January 03, 2017, 10:01:21 PM
Nice work. Dig the wheels.

Went thru the same thing with the header panel several times. Sucks it doesn't unbolt.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on January 04, 2017, 05:09:32 PM
Thanks Jack and Matt for the compliments.
The wheels are Konig Incidents in 15x6 not sure on offset. Ill be selling them for cheap whenever I get my new wheels.

Yea the header is a huge pain. The worst part is that on the coldest day of last year a small amount of bondo cracked so I may have to go back and do it again.  :'(

Update on the project: My lower arm bar came today. I tried to put it on but It turns our im missing the socket that is used to get the lower splash guard off. The worst part about it was that I allready had jacked the car up when I figured it out. Also can one of you guys give me tips on how to get the alternator out. I cant seem to beable to reach the socket in the back

Update: Lower Arm Bar Installed + New Alternator
I was looking at the alternator all wrong when I started it the first time. It ended up only taking me a hour to install the new one. The arm bar took a few hours but that was only because it was just me doing it. It stiffened up steering, also it stopped the car from wandering on the road..
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on January 05, 2017, 09:14:19 AM
When you get ready to fix your header, if you want to come up here, I can pull it out for you so the filler won't be so thick.  Also, If I can afford them, I'll take your wheels.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on January 05, 2017, 08:27:37 PM
When I did mine I tack welded some roofing nails to the panel and pulled it out as best I could. There's still a lot of filler there though. Haven't yet had an issue with it.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on January 10, 2017, 04:17:20 PM
I probably wont be redoing the header panel. I plan on getting it professionally painted.

While I was under my car I realized my front sway bar needs new bushings, and sway bar links. I also need to replace the upper strut tower rubber. Once it gets warmer I plan on getting that done. Does anyone have any recommended brands for these items?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on January 12, 2017, 05:23:08 PM
Just bought everything to convert my Capri to the 94 tails. I also bought the 94 sun-visors.  I'm getting pretty close to how I want the interior to look like. Hopefully next month Ill have the new front seats put in.

Once I get payed again ill be converting to projector headlights with HIDs. If I can find a Halo projector that will fit, I plan on doing demon eyes.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on January 26, 2017, 03:15:52 PM
Just got the 94 Tailight Conversion kit today. Everything was in great condition ill need help with doing the repair on the socket. I plan on having the panel fixed and repainted by a friends shop so I will have to wait to install after that.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 03, 2017, 07:26:45 PM
Big Brake Upgrade has been bought I'm going to install them next weekend. If I run into any snags I'll definitely document it here. I plan on taking good pictures. Is there any reason why this won't fit my N/A?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on February 04, 2017, 04:25:57 PM
Big Brake Upgrade has been bought I'm going to install them next weekend. If I run into any snags I'll definitely document it here. I plan on taking good pictures. Is there any reason why this won't fit my N/A?

Yes, if you have the "small" brake rotors, the knuckle casting is different (we've just confirmed this in the last year) and will not place the caliper at the proper distance from the hub. If I remember right, there is no pattern as to which n/a's got the "large" brakes and which ones did not. Measure before diving in

Will you be grinding your hubs or machining them? New bearings & seals while you're in there?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 04, 2017, 04:36:28 PM
I figured something like that.
How do I tell the smaller brakes from the bigger is it simply a larger rotor?

I'll be grinding the hub down I don't have the money to go get them machined. As I recall it's just grinding abit of the ears around the lug stud goes right?

Yup I'll be changing all the seals and putting a new set of bearings in, I'd rather do it now then later.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on February 05, 2017, 12:36:53 PM
Measure your rotors? Its either 9 3/8" or 10 1/4"

I've machined several sets of hubs for the Galant upgrade. Don't think I'd trust grinding.
Should be easy to find someone with a lathe - ask around? A six pack or a pizza will get a surprising amount of work done
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 05, 2017, 02:23:36 PM
Thanks Matt that's all I needed.
Ill measure my rotors after  Superbowl. If I have the small brakes I can go down to the junkyard and pick up the knuckles from a XR-2. While I'm there I'll pick up a extra set of hubs.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on February 06, 2017, 11:08:31 AM
I've got to come go to the JY with you.  PAP in Winston has only had one Capri in two years.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 06, 2017, 03:03:48 PM
I'll be going this Saturday. It's the U Pull It in Thomasville there's 2 Capris there but they're really picked through.
Ones a 93 Green XR-2, the others a 91 base model.

Jack is there anything you're looking for that I could pick up while I'm there?

I'd love the company if you'd like to come, I honestly could use your help with pulling the knuckles.

Matt would you be willing to machine my hubs?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on February 07, 2017, 07:49:47 PM
Okay, working it out.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 18, 2017, 08:11:37 PM
Just got back from the hospital after having a seizure with Jack Byrd. Im alright but I was told ill need to limit how much im doing, and I wont beable to drive for awhile.

The good news is this should be a one time event but I will be taking precautions for the future.
Matt follow back up with me I want to get the hubs to you as soon as possible.

My goal is to continue to save up and keep working on the build slowly. Ive enlisted several friends who will be helping me so that I dont overexhert myself and have another one.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on February 18, 2017, 08:45:08 PM
Take care buddy.

I think working on the car is a good idea, just do everything in moderation and doing stuff with friends is good too.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on February 18, 2017, 09:58:44 PM
Good deal Michael, glad to here you're doing okay.  Maybe we can get together again soon.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 26, 2017, 02:11:09 PM
(http://i1376.photobucket.com/albums/ah28/michael_hall14/IMG_20170226_135740_zpsbccmxskx.jpg)
Heres the 94 tails in my car
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on February 26, 2017, 03:23:57 PM
That looks really cool, I like the racing stripes
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 26, 2017, 04:00:19 PM
Thanks, my car came with the stripes. Id like to get rid of them but I feel like the paint underneath would be roached. I want to get the car painted Ford True Blue and then do a vinyl over the hood bulge. Ill need to get new bumpers before I get it repainted.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on February 27, 2017, 07:44:57 PM
(http://i1376.photobucket.com/albums/ah28/michael_hall14/IMG_20170226_135740_zpsbccmxskx.jpg)
Heres the 94 tails in my car

Looking good.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on February 28, 2017, 07:12:54 PM
Thanks everyone for the support, and help. I couldnt do any of this without all you guys on here.

News: I need a Escort GT transmission does anyone have it, I want to turbocharge my N/A and not explode the transmission. Also I should be picking up a BP next month, so my next couple updates are going to be engine build related. 
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on March 02, 2017, 12:40:20 AM
Is this your daily driver? If the transmission is that hard to find, just run the F series til it explodes. Hah.

You're going to want to swap the BP and G series at the same time. No use in fabricobbling drivetrain mounts, only to have to re-do them when you stuff the BP in there.

May be worth picking up a whole EGT/protege as a donor.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on March 02, 2017, 01:14:02 AM
Yep the cars my daily currently.

Its not the fact that finding a G series is hard more so, all the ones within 200miles have insane milage on them. The average milage is around 140k, and that just doesnt seem reliable to shove up against a BP with boost.
The worst part is that EGTs are practically non existant here, it seems as tho most have been scrapped. ive found a few Proteges with the BP but theyre all Autos. :-\

I actually consider having the seizure a good thinf, ive gotten the most work done on my car then I have in weeks combined. Its much easier to do radical stuff when I dont have to work about driving it. That being said I really am gonna hate having to wait 3 months to drive again.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on March 18, 2017, 06:21:35 AM
Just got ny hubs back from Matt and I have to say he did a wonderful job  ;D!

I will still need to get the knuckles sense I forgot to lable which spacer went to which knuckle when I sent to him. After that im gonna try and get some Drilled and Slotted to match with my carbon ceramic brake pads.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on March 27, 2017, 02:56:59 AM
Finally installed the Premium Sound radio in the car today, kinda thinking about using the spare radio harness to install a newer one in the glovebox, so I can keep the stock look.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on March 28, 2017, 10:58:15 AM
nice... do you have any pics of the dash
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on March 28, 2017, 04:32:08 PM
I don't currently, that reminds me to take some.

I have some bad news though I just got back from the neurologist and they said it appears as though I have a brain tumor. That doesn't mean I'm going to stop the build or anything, if anything I might be more aggressive to complete it. Just wanted to let you guys know.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on March 29, 2017, 02:08:25 AM
My prayers will be with you and your family. That must be very troubling news for you and those close to you. I hope that you can find peace amidst the uncertainity and I pray that the tumor be removed from your body.

I also hope you keep up the good work on the build as I'd like to track your progress on how it's going for you.

Blessings upon you,

Marcus
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on March 29, 2017, 01:29:03 PM
Thanks Marcus, I'm not really all that worried whatever happens if part of God's plan. Thanks for the prayers I really believe they help.  ;D

I got some pictures of the dash so I'll update my post later.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on April 08, 2017, 04:29:17 PM
Good news guys went in to see a Nuerosurgeon he loomed over my MRI said yea I have a Brain Tumor but the area it's in and the size indicates that more then likely it will never grow or develop anything serious, also I'm going to start interning at a local shop soon, so I'll be learning alot.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on April 09, 2017, 04:03:24 AM
Prayers answered... hallejuyah !

Any chance of an interior dash pic ?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on April 09, 2017, 06:45:46 PM
Good news guys went in to see a Nuerosurgeon he loomed over my MRI said yea I have a Brain Tumor but the area it's in and the size indicates that more then likely it will never grow or develop anything serious, also I'm going to start interning at a local shop soon, so I'll be learning alot.

Congratulations, glad to here it.  What kind of shop are you going to be working at?  Once again, I'm glad for you.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on April 09, 2017, 07:23:13 PM
Sorry about the lack of pics btw, my old phone died and I havent been able to retrieve pictures from it, I'm away from home right now so once I'm back I'll get the taken/uploaded.

I'll be doing whatever they ask of me the shop does everything from mechanical work to paint, so I'm kinda thinking about just buying the paint I'll need. Basically anytime after I'm done with work im gonna be at the shop.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on April 10, 2017, 10:43:47 AM
Sounds like a good deal for you.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on May 14, 2017, 10:39:56 PM
Hey guys I'm still alive I've been going through alot and I've had to put the project on hold for abit. Luckily I've been doing well and I got my 94 Door panels In and I have to say the look gorgeous. I'm planning to convert the whole interior to black. I'll post pictures tomorrow I'm waiting for them to upload currently.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on May 15, 2017, 05:13:00 AM
Take care buddy.

Black interior will look great :) Looking forward to seeing the pics.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on May 15, 2017, 04:42:06 PM
I want a black interior too.  Glad to here you're back.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on June 15, 2017, 06:24:07 PM
I have not forgot the build thread. I'm waiting to finish the interior and get the car ready to be repainted before I lost anything. Currently I have my XR2 spoiler, and 94 Mirrors in the paint shop to be painted gloss black. As for the interior all I have left to do is get my rear 94 speaker panels in, and get black carpets and new seats. Once that's all done I'll post pictures of the process.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: DarkAngel on June 25, 2017, 03:30:03 AM
That sounds cool, I need to get a respray too... looking forward to seeing your progress.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on June 25, 2017, 06:28:10 PM
Hopefully we can get together sometime soon also.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on June 25, 2017, 07:12:04 PM
Hopefully we can get together sometime soon also.

Jack Byrd
I would love to, sadly I'm still on driving restriction from my Seizure so I won't be able to meet up till Augaust.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on June 27, 2017, 08:12:11 PM
Let me know.  I'm going to sell my red one shortly and concentrate on my XR2, don't really need much, but love to get out and ramble anyway.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on June 27, 2017, 09:17:08 PM
I will do for sure, I've been itching to get out for awhile now. I really got to pick up a set of knuckles so I can finally put the big brakes on.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on September 07, 2017, 07:53:56 PM
Alright here's a little update, and I'm sorry for my lack of pictures and stuff I've been incredibly busy these last couple weeks. Anyway onto the good/bad stuff my Capri sprung a huge leak in the heater hose and I've had trouble replacing it, I just finally got it replaced. As of next week I'm going to be on Vacation so I plan on banging some stuff out. I'm planning on getting my interior cleaned up then and shooting pictures, aswell as cleaning up the engine bay. Another cool thing I have to share is I'm getting extremely close to the amount needed to turbo the engine, and do it right so that should be coming soon. I've started looking onto running BG suspension in hopes of using the e153 awd trans. I'll post more layer hope everyone is doing well.

Here's a couple questions regarding the GTX for Clay. 1 does it share it's own unique K-Frame or is it different. If it does and I can acquire it will it bolt into the fwd chassis or is that different aswell.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on September 08, 2017, 12:16:23 PM
Are you gonna go with BP Performance stuff?

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on September 08, 2017, 01:04:32 PM
Yup that's the plan all of his stuff has great reviews. It is pretty pricey though so that's been abit of a problem. I'm planning on running his COP plate and one of their Evo8 Ecus.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on September 09, 2017, 10:05:35 AM
Cool, all that custom stuff is going to be expensive.  Lots of work has to go into R&D and also the manufacturing.  There's no economy of scale because so few people are interested and the guy's gotta make a living.  I hope it all works for you.  You know he has to have something going when his Festiva does 150 in a quarter.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on September 30, 2017, 03:42:57 PM
I'm getting the interior finished up. Waiting on a 94 center console to come. In the coming weeks I'll be installing black carpet, and black leather mustang seats. I also have to install my 94 XR2 gauge cluster.

I have to change the headliner in the Hardtop does anyone want to give me tips?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: SHOwn on September 30, 2017, 10:08:30 PM
Go gentle on the dome light cover, I think it has tangs to hold it on, then it's all screws IIRC. I got my fabric at JoAnn Fabrics, they stock grey and black with the foam backing. YouTube "headliner replacement" and you will find some great walk-throughs. Once you remove the screws and pull the push pins (use an automotive interior pry tool) and free up the fiberboard, you will have to use a very stiff brush to scrub off the remnants of the foam. Once you have all the foam off and the surface cleaned and vacuumed, you can cut the new material to fit, but leave about 4" on all sides if possible for positioning. You will be trimming it after it is glued. Measure where the dome light goes and cut a small undersized X there so the wire can come through.

Before you glue, fill in all the gouges with something smooth that will not shrink, like spakling putty (I used fiberglass since my fiberboard was creased a few spots). You might prime the spots if you use something like that, I would think that Kilz would suffice if it absorbs in and gets some bite.

IIRC, glue is applied to the foam backing, half at a time. Maybe you put some on the fiberboard too, look it up, I forget. You fold the fabric in half and start at the dome light, putting it down and gently rubbing it, working toward getting adhesion all the way across from window to window and then lightly burnish it all the way across like a print head toward the windshield, careful not to have any wrinkles. You can't reposition if you have the right glue. Once you wrap the edges and make some cuts at the corners to properly edge wrap like a gift wrapped present, take the other half that is not glued yet and, with some plastic proteciting the finished half, lay the last half over the finished work so that with plastic protecting the edges, spray the glue on the last half and like a print head again, burnish the fabric to the fiberboard side to side, pass by pass until you reach the back window area, letting your excess wrap, cutting and folding the corners like the front.

Trim it up, use pins to poke through from the backside and mark the push pin holes and then poke them through and put it back together being very careful not to push ANYWHERE very hard, it is very easy to mash a handprint into the foam.

I used a spray adhesive, 3m 38808 or maybe it was 77?. Again, google it or YouTube it and you fill find interior experts who know what to do.
(https://s25.postimg.org/inief7p2n/image.jpg)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on October 01, 2017, 07:58:14 PM
Good explanation.  Trim adhesive is a contact cement so you do have to spray both pieces and wait until it tacks, get dry to the touch.  I have to do mine soon because weather is coming.

Thanks, Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: SHOwn on October 01, 2017, 10:44:35 PM
You might be right about that Jack, I forgot a few details, it's been a busy year. It would still benefit anyone to check out a few YouTube videos and read their adhesive directions as well.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 02, 2017, 01:33:25 PM
Thanks SHOwn I appreciate the great advice. It's helping alot, I'm ordering my material so hopefully I can do it soon.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on October 03, 2017, 10:01:47 AM
Yeah, I've got to do mine also.  Got an idea for a custom touch also.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 16, 2017, 07:57:55 PM
Got the door panels in, and fully functioning. 1994 Center Console is coming sometime next week hopefully. I'm planning on upgrading to the 94 Dash aswell in the future. I plan on having a interior shoo install it as I'm not good at that.

For whatever reason I can't insert a picture using Floor so here's the link. https://flic.kr/p/CpbAzy
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 16, 2017, 08:01:01 PM
https://flic.kr/p/CpbAzy (https://flic.kr/p/CpbAzy)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on October 17, 2017, 11:39:28 AM
Nice.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 24, 2017, 01:10:31 AM
Alright the cars getting serviced right now. I'm doing a service front to back, planning on replacing the radiator fluid, brake fluid, clutch fluid (has been acting up and currently for whatever reason the clutch pedal isn't responding), possibly change Clutch Slave cylinder. While I'm at it I'm going to change the rear brakes, and pads. The car has sat the last  9months while I wasn't allowed to drive. Is there anything else you could think of to replace or give a check. Tires are a must, as these are about a year out of date.

What's left on the car astetically:
Replace Headliner and Recolor Interior Hardtop plastic
Replace Carpet
New Seats
Get Right 94 Sun Visor
94 Dashboard
Fix 94 Rear speaker panel (I'll post pictures I need help with that)
Install XR-2 Gauge Cluster
Install 94  Center Console
Find/install New Front Bumper
Get Car Ready For Paint/Remove Vinyl
New Wheels/Tires
Measure Body For Fender Flares
Install Big Brakes, and Paint Calipers Front/Back Red

Once the car is operable and legal, should be sometime before mid next month, I'm gonna pick up a Escort transmission. Current plan is to get the BP engine rebuilt, then install it along with the EVO 8 ecu. I'm pretty sure I'm going to install the transmission to the B6 as my f-series is showing it's age, and it took alot of abuse when I first was learning stick.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on October 24, 2017, 08:45:52 AM
Don't forget the oil and transmission fluid.  I've got front and rear bumpers that you can have for what I've got in them.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on October 30, 2017, 05:58:11 PM
Car service has been complete. My suspicion of the slave being out was correct, I installed a new one and bled it, kinda a pain. Rear brakes are fine, fronts need to be done but I'm going to wait as I'll be assembling the big brake kit. Anyone know the correct Stainless Steel brake hose to order?

My center console arrived and I'll be installing it soon after I order my carpet kit. It's in great condition and it's going to really shine in the interior. Anybody know of a good photo sharing website neither Photobucket or Flikr seem to work for me on here anymore.

Jack I'm definetly intrested in the front bumper, my rear is fine though.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: SHOwn on October 30, 2017, 09:48:29 PM
Way to go on the console, they help bring the interior into the modern era, at least the beginning of it.  :D
After Photobucket yanked the rug out from under us freeloaders and we lost all our hosted images, I found these guys who are free, don't even require a login and don't mind if you are posting to a forum...
https://postimages.org/ (https://postimages.org/)
Very happy with the free hosting.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on October 31, 2017, 09:22:23 AM
Imgur.com has been pretty good, but with the Photobucket Debacle (ive hosted images there for over 10 years) who knows what will happen with other sites now
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 20, 2017, 07:22:09 PM
Just wanted to let you guys know what's the deal with the GTX. I bought it from Russ, with the intention of him coming, and bringing it down here. Basically we negotiated to have him ship the car here. His truck broke down, and he hasn't been able to get one to use to tow it. I'm currently working 2 jobs trying to get my car complete so it's impossible for me to do the 1200 mile trip to pick it up. So right now I'm at a standstill, when it comes to that. I don't fault Russ with this he's been incredibly helpful through the ordeal, and has offered to give me my money back sense he couldn't complete the his part. I'm honestly more intrested in the parts then the cash. I'm honestly thinking about going through the used 323 GTX parts market to get the car done.

That all being said I'm just going to keep the Capri fwd for the time being. The current plan is to rebuild my BP engine, and get it installed with a EGT transmission so I won't have to mess with pedals, and stuff. I want to overhaul the suspension as it feels really stiff, and not in the good way. Interior is coming together slowly and I'm really happy about it. Hopefully soon I'll have it repeated working with my friend to price that out for the car.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on November 21, 2017, 11:22:06 AM
I could probably go get it for you for expenses if you want to do it that way.  See what you can work out with Russ, he should give you what his expected expenses back.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on November 21, 2017, 06:31:21 PM
I'll let you know Jack I have a few expenses coming up with the build these next weeks. I wouldn't be able to do it till January at the earliest.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on November 23, 2017, 11:47:10 AM
Hey, you know I got nothing to do.....lol

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 18, 2017, 11:10:56 PM
Interior is now complete and just needs installation, all here minus seats. Current plan is to get a set of Mustang Cobra seats from a 03 Terminator, and get them redone a classic style. The plan is to get a interior shop to install the dashboard, seats, and carpet in the coming weeks. Once all that is done, I'll be moving onto paint work, and Engine building. Current estimate on the car being finished, to a point I enjoy will be around April at the latest. Good news is my second job is at a Mechanics Shop, so I've been learning alot, and hopefully I can start getting the suspension, and other things squared away finally. On a sad turn of events, it seems ad though I won't be able to use the GT transmission as I thought as from what I've discovered that Capri in itself is Cable operated, kinda confusing sense it uses a hydraulic slave cylinder. Anyone care to explain that? Does this mean I'll be forced to use the XR-2 transmission?
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on December 19, 2017, 11:56:41 PM
The XR2 uses a cable.

The EGT transmission is hydraulic actuated, just like the N/A capri. If you started with an N/A capri you should be good to use the EGT slave on the EGT trans.

Even still there are ways to convert from one to the other, it's a common thing.
My GTX transmission was hydraulic, I welded an extension to the fork and re-clocked it to use with a cable. (this was actually far simpler for me than swapping pedal assemblies, but I was prepared to do that)
The Festiva guys use a simple bracket with a linkage to actuate EGT hydro trans from their cable setups
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on December 20, 2017, 09:55:49 AM
As always thanks Matt you're a huge help. What threw me through a loop was that I was doing research and articles kept on saying the N/a trans was cable, and I knew that wasn't the case with my car, but I don't know enough about the differences between the two to know if it was simply a case where the clutch itself was hydraulic but there was a cable somewhere within. You guys really help out alot, and I really appreciate it.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on January 02, 2018, 09:28:01 PM
Here's something interesting I found out. One of my co-workers has several RX-7s of the late 80s variety, and the wheel base and width of the car is nearly the same maybe it's a few milimeters larger. This made me thing of buying a rearsubframe from one of his parts cars for my Capri. This would give better braking options, aswell as better bearings. This however would require different trail links, I believe as I don't see the suspension working, but it's something I'm going to be looking into for the future. Another nice part of it would be it allows me to convert the rear to 5lug, the fronts would need the BG GTR knuckles to used 5lug for the front but the idea is exciting.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on April 25, 2018, 10:29:31 AM
Anyone have any tips for installing carpet in the Car? I have a new set of molded carpet. What are you're guys opinions on flocking the door panels, aswell as the dash. Flocking is incredible cheap and from what I've gathered will stop reflecting sunlight off the dash something, I've noticed the Capri does alot in my case. Also I've been away I got the oil pressure sender fixed, aswell as repairing my passenger window regulator for the second time. I installed new plugs and wires and I noticed the car runs incredibly better but it seems as though the ignition module in my dizzy is going out so I'll most likely change that once I get the time. As for the brakes I have ceramic pads and a good set of discs, the only thing I'm waiting for to finish my brake upgrade will be Escort brake lines and the Mitsubishi rotors, the ones I ordered were incorrect. If anyone has the right part number for the rotors that would help immensely.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: SHOwn on April 25, 2018, 01:03:35 PM
Snake, are you forgetting that we had this discussion on the last posts of the BBUG write up?
http://teamcapri.com/forum/index.php/topic,2720.75.html (http://teamcapri.com/forum/index.php/topic,2720.75.html)
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on April 25, 2018, 02:31:39 PM
I did thanks SHOwn, working 13hours a day has taken a toll on me. Got them ordered. The only nice thing is I get to work on my car when it's slow at my shop.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on June 06, 2018, 09:21:12 AM
I have unfortunate news. My car blew it's head gasket there were signs earlier that it was going south but I didn't pay attention to it. When I changed my spark plugs I saw that the threads were rusted due to condensation in the cylinder. I ended up changing the valve cover gasket as I saw it was leaking and might of been the culprit. I believe my thermostat must have broken or something as when the car overheated it was almost immediately. I ended up pulling off the highway the second I saw it, but it was too late the head gasket was toast. I'll end up redoing it, with a Comedic Gasket and ARP Studs. After that I'll probably get a aluminium radiator and new 180f thermostat to make sure it doesn't happen again.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on June 06, 2018, 11:24:03 AM
Dang, that's tough.  Good luck with it.
Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: Rocketman on June 06, 2018, 09:52:03 PM
Is it smoking? Is there oil/water mixing?

Don't do the 180 thermostat. It causes way more problems than it may solve. Stick with the OEM 195
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on June 06, 2018, 10:24:53 PM
Yup white smoke. The oil was in my radiator. The engine oil hasn't mixed it looks like it's a normal color, as it should be. From what it seems I've had a small leak sense January at the least And when I went out on the highway it finally got to the point it couldn't take it anymore. I'll be posting pictures as I get it torn apart. I'll also be replacing the timing belt while I'm in there. I drove it maybe for a total of 30 seconds with it overheated, but it was bad enough it ended up consuming all the coolant in the radiator. I ended up having to put water in the so it had enough time for the heat to stay there. What else would you guys change while I'm in there? What's intresting is when I did my oil change  last month I had no signs of coolant in the oil.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on April 21, 2019, 04:17:57 PM
My Capri is back on the road. Finally got it all back together, and its doing much better. I found out the stumble was due to the distributor coil and rotor being bad. I pulled the dizzy out and rebuilt it at my work and nows all good. The car runs smooth, almost like new. Ill be working on soon getting the new dash and other interior into the car. My goal is to have the interior done in a few months. Ill also havd to get my rx7 seats redone. I was honestly really suprised how easy it was to do a headgasket on this car it took me about 2 days. The hardest part was getting it back together. I was amazed when i got the wiring harness out how little amount of wires the car uses, it makes sense why engine swaps that way could be so easy.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on April 22, 2019, 09:22:21 AM
Congratulations! ;D
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on April 25, 2019, 11:09:27 AM
Stayed up till 11 last night getting the stripes off. Ill be getting it ready to paint. Im thinking of going with a dark ford blue like Koana Blue. Paint should be done in a month or so. My cars looking pretty rough right now for the meet but im excited to get the car out here and meet everyone. Im working on making a custom splitter and cannards.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: jdp on April 25, 2019, 09:38:47 PM
Run what you brung Michael.  no worries on looks.  I would have time to wipe the pollen off the wife's 94 NA from the way my next day or two look.  See you there!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on April 26, 2019, 07:12:35 AM
Maybe we can plant the seeds for a Capri meet or at least meet some more enthusiasts.

Jack Byrd
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on July 03, 2021, 07:40:10 PM
Got the Capri back together today, finally after all these years I finally figured out what hose was leaking. It was one of the main hoses going to the head from the ISC Valve to the head, it was the one that runs underneath to directly to the head. Figures why it was so hard to find lol. Either way spent all yesterday and today getting that out, and putting a new one in, all in all simple-ish just a giant PITA, especially without access to my works lift. Had the smallest slit in the house I've ever seen, but I guess it was enough to make me lose a lot of coolant lol. What's good is I always kept her full, and made sure she never overheated.

While I had the engine apart in 2019: I replaced the head gasket, the timing belt, rebuilt the distributor, replaced upper radiator hose, coolant temp sensor, oil pump(upgraded), valve cover gasket, new platinum sparkplugs.

From March 2020 to today the car had been sitting due to being stuck in quarantine, and lack of being able to get parts, back a few months I got my vaccine, and finally was able to start going back out so I could work on my car, soon Ill return to work!

Things that ive noticed that need to be done:
new right hand axel(I have it haven't had access to a lift to put it in)
oil pan seal is bad
front main seal is bad
A/C system has a leak somewhere(leaks very fast wont hold Freon for more then a day, its also been upgraded to the new stuff by previous owner)
Big Brakes need to be put on(currently missing the rotors, have everything else, thanks to Rocketman I was able to get the hubs milled(huge thanks!!))
Interior needs put in(just tore out headliner in the hardtop as it was sagging really bad ill replace that with new black headliner)
brackets need to be made for my seats, and I need to source a new right hand seat bracket.

After that's all said and done, she should be off to paint, and then after that ill work on engine swapping her!

I have some secret stuff, I'm saving for later once I have the engine more complete, and paint work done. I'm very excited to show everyone, but now's not the time to show it off lol!
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: greywolf27030 on July 04, 2021, 09:53:30 AM
Glad to see you're back with us.
Title: Re: Capri RS Build(WashiestSnakes Build)
Post by: WashiestSnake on July 09, 2021, 05:13:20 PM
Spent today putting the new carpet in, ended getting rained on while in the middle of cutting it, so only have one seat in the car. I feel the carpets going to end up being a bitch, but ill do my best, and if I cant get it ill just order a new one and get a professional to do it later. Tomorrow ill keep knocking away at it. I've told myself I can't go back to work till I'm done, as I've had all these car parts sitting in a shed without time to install.  I've figured now's the best time to do it with being out of work.

Have a buddy working on making a bracket for my passenger seat so I can bolt my new seat up to it.