TeamCapri
General => General => Topic started by: pilotlars on October 09, 2019, 06:40:46 PM
-
Hello all! I'm reassembling my Capri but when I bought it 5 years ago some parts were missing or not installed. I'm trying to install the little grey mouldings forward of the retracted top, over the front seatbelt upper-attachment point. There's a hole in the moulding and a hole in the frame with a plastic insert to accept a bolt or screw or something. Can someone send me a photo either on here or direct to my phone? 918.289.6504 Thanks in advance! Lars
-
That sounds like the B pillar hardtop mounting point, maybe.
-
(https://i.postimg.cc/TwhX73qR/panel-info.jpg) (https://postimg.cc/0Mg3rxB3)
-
Alright thanks that's a good start...So these are metal screws? Are they unique or the same as used in many other places?
-
Phillips head screws.
-
Awesome thanks. I have all the screws plus extrasd found 2 sets that seem to fit. I even found one plastic cap. The car may have had only one. Thanks!
-
That is the mounting point for one of the special fasteners for the tonneau cover. Nothing needed there unless you have the cover and installed the fastener.