TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: Quick question...  (Read 2787 times)

tonlaw71

  • Administrator
  • Sr. Member
  • *****
  • Posts: 493
    • 1992 XR2 and a 2013 Nissan Juke
Quick question...
« on: November 11, 2010, 12:54:00 PM »
Anyone know what size the lock nut is on the rear hubs? I have a 91 N/A if that makes a difference.

Thanks!!

Tony
Logged
///Tony aka Bubba Gumpshrimp\\\

///'92 Plasti-Dipped XR2\\\

tonlaw71

  • Administrator
  • Sr. Member
  • *****
  • Posts: 493
    • 1992 XR2 and a 2013 Nissan Juke
Quick question...
« Reply #1 on: November 11, 2010, 01:32:00 PM »
Never mind. I found it. Appears to be 21mm.

Have a great day!!
Logged
///Tony aka Bubba Gumpshrimp\\\

///'92 Plasti-Dipped XR2\\\

CapriTypeR

  • Administrator
  • Old-Timer
  • *****
  • Posts: 2442
    • http://Roo-Sport.com
Quick question...
« Reply #2 on: November 11, 2010, 03:37:00 PM »
And it only took you 38 minutes!  Nice job!
Logged
Need parts?? Go to http://www.Roo-Sport.com
for the worlds largest selection
of new and used Capri parts!


Kev93

  • Full Member
  • ***
  • Posts: 105
    • '93 XR2 | Ford F-150
    • http://ombe.com
Quick question...
« Reply #3 on: March 10, 2012, 02:14:00 PM »
Sorry to dredge up this auld thread.

Is this just a generic part?

Working my brake job ... need to turn or replace L rear rotor...what a pain!  Is the manual correct ... must I buy a new locknut?  Are they hard to find?

I've got a spring and a clip missing on one side, too.   :(
Logged
/* Just along for the ride */
\\\'93 XR2 in progress | Daily Driver | 5th Gear Swap | Rocketman VAF Adapter

ALVYDB

  • Newbie
  • *
  • Posts: 2
Quick question...
« Reply #4 on: March 11, 2012, 07:54:00 AM »
I THOUGHT IT WAS EAZY. HARDEST PART WAS WAS FINDING THE PARTS & THEN FIGUREING HOW THEY WENT IN. 1 THING IS FOR SURE IF YOU LEAVE ANY PART OUT THEY DONT WORK RIGHT. THE CLIPS YOU ARE MISSING I FOUND ON EBAY. THE LOCK NUT WAS VERY EAZY . I FOUND THEM AT MY LOCAL BUMPER TO BUMPER STORE. JUST TAKE YOUR OLD ONE WITH YOU.  THE RT & LEFT SIDE ARE DIFFERENT THE RT SIDE HAS CCW  THREADS. YOU WILL NEED A PICTURE OR YOU WILL NEVER FIGURE IT OUT. THIS FORUM HAS A LINK TO THE FORD MANUAL
Logged