TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Remember! TeamCapri is a donation driven site. There are no ads here!

Author Topic: Clutch Slave Cylinder  (Read 321 times)

navid

  • Newbie
  • *
  • Posts: 2
    • 1992 Capri Base
Clutch Slave Cylinder
« on: March 07, 2021, 11:59:15 PM »

From what Iíve read, I was having symptoms of a bad slave cylinder. Bought a new one and jacked the car up to swap it out. It looks like the cross member is right underneath it and would need to come out to access it.

I looked at CapriTech and searched this forum and nothing is said that the crossmember needs to come out. Can someone confirm that I just need to make due with what little space is there?

Logged

greywolf27030

  • Old-Timer
  • *****
  • Posts: 1402
    • 1991 XR2, 1992 XR2, 1993 XR2
Logged
Jack Byrd

chrispoe

  • Sr. Member
  • ****
  • Posts: 424
    • 91 BP Capri GT
Re: Clutch Slave Cylinder
« Reply #2 on: March 08, 2021, 09:14:07 AM »

If you undo the two nuts on the front transmission mount from the underside of the crossmember, you can then use a jack with a piece of wood under the transmission to tilt the drive train backward.

Doing this will make the job way easier.
Logged

navid

  • Newbie
  • *
  • Posts: 2
    • 1992 Capri Base
Re: Clutch Slave Cylinder
« Reply #3 on: March 08, 2021, 10:04:36 AM »

I will look into this. Thank you both!
Logged