Gentlemen!
I'm planning my attack on the winking headlights, and I want to make sure I'm thinking about this right.
With the headlight motor disconnected, I should be able to attach the meter to the plug coming from the controler. When I move either of the headlight switches, I should see a 12V signal, right? Would this signal only last until the "good" headlight has moved fully, or would it remain present, as there is no "completion" of the cycle for the disconnected light?
Due to other projects, I've currently got access to the controler, and want to be able to rule it out as a possible source of error before replacing all the inner trim.
Thanks for your advice!
Cheers
James