TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

If you've registered make sure emails from TeamCapri are not landing in your spam folder!

Pages: 1 [2]

Author Topic: 1994 XR2 resurrection  (Read 365 times)

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5233
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: 1994 XR2 resurrection
« Reply #15 on: July 23, 2020, 03:00:41 PM »

Yes, a lot of work. A lot more work ahead of me too. Little bit at a time.

The stock tanks seemed to have a few weak spots, welding or brazing I'm not sure. Salt in a confined space like that probably doesn't do it any favours.


Here's the front passenger side brake line. This one was a doozy, heck of a time fitting it with the engine in place, but the copper nickel line is sooooo forgiving.



And all new bits coming from the master cylinder.



I've got to order another roll of line, but I should have enough to do the two lines on the rear axle.
I have decided to try to use the stock lines from the firewall to the rear axle, for the time being, if they will hold. See what happens. I have a friend with a shop with lifts, if I could manage to borrow one for an evening once I get the car more streetworthy it would be much easier to replace those two main lines. They don't look terrible, so we'll see I guess
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


jdp

  • Full Member
  • ***
  • Posts: 162
    • 1994 Magenta Capri NA, 94 Reef greenXR2 and 92 XR2
Re: 1994 XR2 resurrection
« Reply #16 on: July 26, 2020, 10:18:08 AM »

Nice work Rocketman.  I appreciate the pictures and your expertise.   

John
Logged
John

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5233
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: 1994 XR2 resurrection
« Reply #17 on: August 03, 2020, 04:04:59 AM »

Another week of tinkering.

Managed to get the unions done to the old lines:



These sucked to do. Hah. I wanted to stagger them and get them nicer looking but it's just so tight there, and working upside down isn't my favorite thing.

Front driver side caliper bleeder screw snapped. It was super rusted into place.
I had good luck another time using the milling machine to mill out the old bleeder without killing the caliper threads. I got it to work again but it was much easier last time. Chased the threads with a tap to freshen them up. Seized pretty bad, other 3 were totally fine.  ???





The bleeders are M8x1.0 which apparently none of my local stores carry. And apparently a relatively uncommon size that they're kinda hard to find online. Speed-bleeders, yes. Found the standard ones in a big assortment kit on Amazon but not individually. So I grabbed one from my parts car for the time being

I went to replace the lines on the rear axle, and every flare nut is seized. I tried a lot of PB blaster and some moderate heat and no luck.
With the system sealed and in the interest of feeling like I made progress, I bled all 4 corners with the rear lines as-is and everything seemed to hold, pedal is firm.
I'll test drive it this week around the parking lot. So I may have to do all the lines firewall back at once, depending on how destruct-ey I have to get getting the old stuff apart.

So if anyone's got a decent rear brake junction piece for sale let me know
« Last Edit: August 03, 2020, 04:07:00 AM by Rocketman »
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


greywolf27030

  • Old-Timer
  • *****
  • Posts: 1085
    • 88 Festiva, 91 Capri, 91 XR2, 92 XR2
Re: 1994 XR2 resurrection
« Reply #18 on: August 03, 2020, 09:19:37 AM »

You're the man. Have you ever tried a 50/50 mixture of acetone and antifreeze?
Logged
Jack Byrd

jdp

  • Full Member
  • ***
  • Posts: 162
    • 1994 Magenta Capri NA, 94 Reef greenXR2 and 92 XR2
Re: 1994 XR2 resurrection
« Reply #19 on: August 03, 2020, 01:46:11 PM »

I guess I should scavenge the bleeders out of my old calipers that I have laying around.
Logged
John

redsteve

  • Newbie
  • *
  • Posts: 19
    • 1991 Capri, the rest are red or appliances...
Re: 1994 XR2 resurrection
« Reply #20 on: August 04, 2020, 04:45:50 PM »

I second acetone and antifreeze as an option.

Another one: I gave up PB Blaster for Kroil as my go-to, a changed I made years ago and have stuck with.

Cool project and following...

Steve
Logged

greywolf27030

  • Old-Timer
  • *****
  • Posts: 1085
    • 88 Festiva, 91 Capri, 91 XR2, 92 XR2
Re: 1994 XR2 resurrection
« Reply #21 on: August 05, 2020, 09:44:26 AM »

I second acetone and antifreeze as an option.

Another one: I gave up PB Blaster for Kroil as my go-to, a changed I made years ago and have stuck with.

Cool project and following...

Steve

I agree with the Kroil, it's just hard to find.
Logged
Jack Byrd

redsteve

  • Newbie
  • *
  • Posts: 19
    • 1991 Capri, the rest are red or appliances...
Re: 1994 XR2 resurrection
« Reply #22 on: August 05, 2020, 08:17:00 PM »


One of the local farm/ranch stores always has Kroil in stock, and bigger spray cans too. Still, if I need one can I buy two. Sometimes, they have one gallon cans in stock. It' expensive...but worth it (there's a lot of things like that...).

Steve
Logged
Pages: 1 [2]