TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: WTB Flywheel for 91 Xr2  (Read 3030 times)

Incubus828

  • Newbie
  • *
  • Posts: 10
    • '96 Mazda Miata, '91 Capri Xr2
WTB Flywheel for 91 Xr2
« on: April 22, 2019, 07:12:26 PM »

Wanting to get a flywheel that fits a '91 Xr2.

Long story short what we believe happened is that her transmission got flooded with trans fluid where there shouldn't have been fluid and it roasted the clutch. We don't know for sure whether the flywheel is dead, but we haven't gotten the trans off to be able to do a thorough check.  We know for a fact the clutch is dead as it will no longer engage, so the car only moves in neutral with some physical persuasion (so to speak).

I looked around but I can't seem to locate a decently priced flywheel, low on the funds right now and trying to get her back up and running.  Any help locating is appreciated!
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5401
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: WTB Flywheel for 91 Xr2
« Reply #1 on: April 24, 2019, 09:59:53 PM »

Generally the flywheel won't go bad - unless it is cracked (rare)
It's much cheaper to take it to an engine shop and have it resurfaced. There is plenty of meat on them from the factory
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"