TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: Engine stumbles around 4500 rpm - new distributor, cap and rotor  (Read 341 times)

94daves

  • Full Member
  • ***
  • Posts: 110
    • 1994 Mercury Capri N/A
Engine stumbles around 4500 rpm - new distributor, cap and rotor
« on: November 10, 2018, 03:44:44 PM »

I just replaced the distributor, cap and rotor (along with all the belts, water pump, alternator, spark plug wires) and the engine stumbles around 4500 rpm.  It stumbles at 4500 going into first, second, etc.  Could this be something due to the timing or new distributor?  Or something else?  It did not do this before I put in all the new parts.  Thanks.
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5109
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: Engine stumbles around 4500 rpm - new distributor, cap and rotor
« Reply #1 on: November 19, 2018, 05:53:18 PM »

I would double check everything, make sure none of the plug wires are loose. Have you verified engine timing? Does the car feel like it has normal power up to the point where it stumbles?
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


94daves

  • Full Member
  • ***
  • Posts: 110
    • 1994 Mercury Capri N/A
Re: Engine stumbles around 4500 rpm - new distributor, cap and rotor
« Reply #2 on: November 23, 2018, 10:10:32 PM »

The plug wires are tight.  The car feels like it has normal power up to 4500 rpm.  I just drove it again today and it was doing the same thing.  It's very repeatable.  I have not verified the engine timing.
Logged

Pappy T

  • Jr. Member
  • **
  • Posts: 93
    • 91 base Capri
Re: Engine stumbles around 4500 rpm - new distributor, cap and rotor
« Reply #3 on: December 17, 2018, 03:55:49 PM »

Get it fixed ??
Logged

94daves

  • Full Member
  • ***
  • Posts: 110
    • 1994 Mercury Capri N/A
Re: Engine stumbles around 4500 rpm - new distributor, cap and rotor
« Reply #4 on: December 22, 2018, 11:51:44 PM »

No, and Iíve stored it for the winter so itíll sit until March or April. 

Does anyone have any ideas?  Could it be fuel related?  It just seems such a coincidence that it started stumbling after I had some work done to it.  Could one of the mechanics knocked something off or loose by accident?
Logged

chukT

  • Jr. Member
  • **
  • Posts: 68
Re: Engine stumbles around 4500 rpm - new distributor, cap and rotor
« Reply #5 on: December 23, 2018, 12:46:12 PM »

With what you had done, I would also suspect the base timing first. Verify that it is set properly as your next step.
Logged