Hello all! This is my first post on team capri, but I've been reading quite a bit from this site since I first got my Capri. Over the past couple of months I've removed my motor and trans, resealed all the major things (rear main seal, oil pan, valve covers) as well as changed the clutch. Upon reinstalling the motor and trans I've found that I have a few grounds misplaced and could use some help as to where certain grounds in the wiring harness are supposed to be bolted. I plan eventually to upgrade my car, but getting it running is the first step. I've found the two grounds near the distributor need to placed on the bracket, but I still have one coming through the firewall I have no clue what to do with. Any help would be appreciated.