TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Remember! TeamCapri is a donation driven site. There are no ads here!

Author Topic: Oil cooler lines and turbo cooler lines  (Read 2379 times)

greywolf27030

  • Old-Timer
  • *****
  • Posts: 1658
    • 1991 XR2, 1992 XR2, 1993 XR2
Oil cooler lines and turbo cooler lines
« on: March 29, 2017, 08:55:02 PM »

I've replaced all the coolant lines except for the oil and turbo lines.  The oil cooler lines appeared to formed hoses and I didn't even know there were turbo cooler lines until I did a database search on the oil lines.  Are these available or do we just have to do the best we can?

Thanks, Jack Byrd
Logged
Jack Byrd

Gaz

  • Sr. Member
  • ****
  • Posts: 423
  • Do no harm, take no sh!t.
    • 92 XR2, 01 LL Bean Outback, 92 Concours, 86 F150
    • Saint Cloud Exhaust
Re: Oil cooler lines and turbo cooler lines
« Reply #1 on: March 29, 2017, 10:57:26 PM »

I just used trans cooler line.
Logged

greywolf27030

  • Old-Timer
  • *****
  • Posts: 1658
    • 1991 XR2, 1992 XR2, 1993 XR2
Re: Oil cooler lines and turbo cooler lines
« Reply #2 on: March 30, 2017, 10:01:05 AM »

No problems with binding in those tight corners?

Jack Byrd
Logged
Jack Byrd

Gaz

  • Sr. Member
  • ****
  • Posts: 423
  • Do no harm, take no sh!t.
    • 92 XR2, 01 LL Bean Outback, 92 Concours, 86 F150
    • Saint Cloud Exhaust
Re: Oil cooler lines and turbo cooler lines
« Reply #3 on: March 30, 2017, 10:40:51 AM »

Not too bad, with the right angle. Had to fiddle with it for a while to get it kosher.
Logged

greywolf27030

  • Old-Timer
  • *****
  • Posts: 1658
    • 1991 XR2, 1992 XR2, 1993 XR2
Re: Oil cooler lines and turbo cooler lines
« Reply #4 on: March 30, 2017, 11:16:45 AM »

Thanks, Jack
Logged
Jack Byrd

Casper

  • Jr. Member
  • **
  • Posts: 69
    • 93 XR2 and 91 Turbo Clubsprint (tribute)
Re: Oil cooler lines and turbo cooler lines
« Reply #5 on: March 31, 2017, 09:01:23 AM »

You can get pre-bent hoses which can be cut to length around the bend - I found the angle too tight to just use standard hose as it kept crimping/kinking at the bend.  It is a damn fiddly place to get a hose on and off...!!!
Logged

greywolf27030

  • Old-Timer
  • *****
  • Posts: 1658
    • 1991 XR2, 1992 XR2, 1993 XR2
Re: Oil cooler lines and turbo cooler lines
« Reply #6 on: March 31, 2017, 10:29:30 AM »

You can get pre-bent hoses which can be cut to length around the bend - I found the angle too tight to just use standard hose as it kept crimping/kinking at the bend.  It is a damn fiddly place to get a hose on and off...!!!

Do mean some hose that kinda works and then force it?

Thanks, Jack
Logged
Jack Byrd