If you've registered make sure emails from TeamCapri are not landing in your spam folder!
Ummm…. the 929 master cylinder only has two outputs vs our Capri’s four with built in proportioning, I would use something like this if I were to use that large 1 inch master cylinder.http://ssbrakes.com/i-10094012-distribution-block-all-in-one-prop-block-black-a0730.html
I have an MX3 booster/master which is larger and looks like it will bolt up, and has the prop valve bolted to the booster. I have not tried to use it yet. Miata unit looks very similar as well