TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Remember! TeamCapri is a donation driven site. There are no ads here!

Author Topic: changing oxygen sensor on 93 Xr2  (Read 1863 times)

deewoody

  • Jr. Member
  • **
  • Posts: 50
    • 1993 Capri XR2
changing oxygen sensor on 93 Xr2
« on: July 11, 2016, 04:49:54 PM »
Hello all,
i was wondering if anyone can give me advice on how to get the old oxygen sensor out ?! Holy moly !  Is it just an open end wrench, or a very deep well socket ?  thanks for any advice
Darren
Logged

azgtx

  • Old-Timer
  • *****
  • Posts: 548
Re: changing oxygen sensor on 93 Xr2
« Reply #1 on: July 11, 2016, 05:32:39 PM »
Go to Auto Zone and get the slotted O2 socket and a can of pb blaster. Spray it and let it sit. When using the socket you back the sensor out a few turns then turn it back in...then repeat. This cleans the threads so they don't jam up with the crap on the threads in the manifold.  Pretty simple.
Logged