Please login or register.

Login with username, password and session length
Advanced search  


Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: Ignition control module  (Read 903 times)


  • Newbie
  • *
  • Posts: 18
    • 1994 mercury capri base
Ignition control module
« on: April 15, 2016, 12:43:25 PM »

Does anyone know if there is a spec for the resistance of the coil on the ignition control module?  Or could someone give me a reading from a known working ignitor? I would like to know how the ones I have compare to a good one.

Pappy T

  • Jr. Member
  • **
  • Posts: 88
    • 91 base Capri
Re: Ignition control module
« Reply #1 on: May 20, 2016, 08:50:18 PM »

Situation resolved ?? Might try contacting Wells , I talked to a tech there about coil readings and they were more than helpful. Since they make a replacement for Capris I would think they would have some numbers to play with. Worth a try, if you find anything please pass it on ! Good luck.


  • Sr. Member
  • ****
  • Posts: 382
  • Do no harm, take no sh!t.
    • 92 XR2, 96 Outback, 77 KZ650
    • Saint Cloud Exhaust
Re: Ignition control module
« Reply #2 on: April 19, 2018, 09:30:07 PM »