TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: New clutch project for summer  (Read 2210 times)

94daves

  • Full Member
  • ***
  • Posts: 115
    • 1994 Mercury Capri N/A
New clutch project for summer
« on: March 09, 2016, 09:00:10 PM »

I have a 94 NA with 99k miles and want to replace the clutch and other clutch related items this summer.  To purchase everything I need from RockAuto, what should I buy?  Here's the start of my list:

1. Exedy clutch kit
2. Centric clutch master cylinder
3. Centric clutch slave cylinder
4. ??
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5492
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: New clutch project for summer
« Reply #1 on: March 10, 2016, 12:38:41 AM »

Rear main seal
Axle seals if you're motivated
Engine mounts if they're shot

Since you will likely have the suspension apart to get the axles out, it's a good opportunity to do balljoints / tie rod ends / control arm bushings / swaybar endlinks / struts / wheel bearings & rotors if need be
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"