Tech, Repairs, Upgrades > Brakes/Suspension/Tires/Wheels

Best Sway Bar End Links

(1/3) > >>

kellsonm:
Hey everyone, I was searching the forum for some info on sway end links, and I found that Energy Suspension part 9.8125 fits our Capris. Has anybody used these? Or does anybody recommend a different part? I am installing these in the front and rear or my '94 n/a 5spd along with lowering springs and tokico struts, so performance is my top priority. Thanks

http://m.oreillyauto.com/mt/www.oreillyauto.com/site/c/detail/ENS0/98125R/N1031.oap?ck=Search_sway+bar+link_N1031_1189425_2620&keyword=sway+bar+link&pt=N1031&ppt=C0106

chrispoe:
I have a pair of them on the front of my car. The polyurethane bushing are stiffer then the oem rubber ones and they did slightly reduced body roll in corners. After 10 plus years on my car, the bushings are still in mint condition, but the zinc plated hardware started rusting in just two years.

kellsonm:
Did you have to modify them at all?

chrispoe:
The Energy Suspension end links on the front of my capri are # 9.8122 and require no mods to be installed. They are almost identical to the originals except they’re about 5mm longer. The part # you gave is too long and will decrease performance. It may also result in the stabilizer bar end coming into contact with the axle.

I just did a tire rotation this last weekend and found one of the bushings on the rear driver’s side crushed. I measured the rear link and looked at Energy Suspension’s part catalog to find  # 9.8120 end link. It’s less then 2mm longer than the original and should be a nice upgrade for the rear.

kellsonm:
Excellent, then I'll be getting a new set as soon as possible, thank you!

Navigation

[0] Message Index

[#] Next page