TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: Halfshaft spline amount  (Read 2008 times)

chrispoe

  • Sr. Member
  • ****
  • Posts: 435
    • 91 BP Capri GT
Halfshaft spline amount
« on: May 27, 2015, 10:45:30 AM »
Has anybody taken the outer CV joint off an XR2 halfshaft and counted the amount of splines? I know the inner CV connects via 25 splines on XR2 halfshafts, but I知 not sure about the outer CV on XR2s.
The N/A痴 have 22 splines on the inner and outer, but are the outer CV on the XR2 the same as the N/A痴 22 spline CV or are they different like the inner CV?
Logged

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5493
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: Halfshaft spline amount
« Reply #1 on: May 27, 2015, 11:06:40 AM »
The inners on the XR2 are 26 spline.
The outers on all Capri are 24 spline.

I'm not sure what the inners on the N/A trans are, 22 does not sound right.

Are you talking about the splinecount on the axle shaft itself?
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


chrispoe

  • Sr. Member
  • ****
  • Posts: 435
    • 91 BP Capri GT
Re: Halfshaft spline amount
« Reply #2 on: May 27, 2015, 04:13:06 PM »
I知 aware of the inner and outer driveshaft spline counts on XR2s(26 in and 24 out) and N/As(24 in and 24 out). What I知 asking about are the splines on the axle shafts themselves that go into the CVs when you disassemble the driveshaft like this.

Although this is a pic of a 26 spline shaft from a F2T I plan on using for project GTZ.  I知 curious as to the amount of splines on OEM XR2 shafts are. I know the inbound side of the shaft has 25 splines just like the 80痴 N/A 626s and MX6s, but I知 not sure of the outbound side.
Logged