TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: sloppy shifter fix  (Read 2627 times)

rocman

  • Newbie
  • *
  • Posts: 29
sloppy shifter fix
« on: April 25, 2010, 09:08:00 AM »

My first project on the new-to-me XR2. My shifter had lots of play so I decided this would be a good rainy day project.

Climbed underneath to find the bushing was pretty well shot and not existent. Unbolted it and was able to fabricate a bushing from a piece of rubber hydraulic hose. Used a couple of washer on either side, put the bolt back on and now have a nice tight shifter with no play.
Logged