TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Pages: 1 2 3 [4]

Author Topic: What Size and Offsets  (Read 49053 times)

Rocketman

  • Administrator
  • Old-Timer
  • *****
  • Posts: 5492
    • 91 BPT AWD Capri & 1991 XR2
    • http://www.werbatfik.com
Re: What Size and Offsets
« Reply #45 on: April 05, 2014, 12:45:10 PM »

I ran a search, according to this site: http://home.mindspring.com/~mcdonald.joseph/XR2/Wheels.htm
the stock wheel offset is 45mm
« Last Edit: April 05, 2014, 09:24:58 PM by Rocketman »
Logged
1.8L Turbo All Wheel Drive Capri... the "GTXR2"


94daves

  • Full Member
  • ***
  • Posts: 115
    • 1994 Mercury Capri N/A
Re: What Size and Offsets
« Reply #46 on: April 05, 2014, 07:23:41 PM »

Great info.  Thank you.  Here's the website: http://home.mindspring.com/~mcdonald.joseph/XR2/Wheels.htm
Logged

94daves

  • Full Member
  • ***
  • Posts: 115
    • 1994 Mercury Capri N/A
Re: What Size and Offsets
« Reply #47 on: April 05, 2014, 07:40:16 PM »

Check out this great picture from his website: http://home.mindspring.com/~mcdonald.joseph/XR2/Wheel%20Offset.jpg
Logged

Gaz

  • Sr. Member
  • ****
  • Posts: 423
  • Do no harm, take no sh!t.
    • 92 XR2, 01 LL Bean Outback, 92 Concours, 86 F150
    • Saint Cloud Exhaust
Re: What Size and Offsets
« Reply #48 on: September 29, 2015, 09:52:05 AM »

Yeah, I know the thread is old.

Using 1982 280zx 14" +7 offset wheels. I dig them very much.
Logged

greywolf27030

  • Old-Timer
  • *****
  • Posts: 1658
    • 1991 XR2, 1992 XR2, 1993 XR2
Re: What Size and Offsets
« Reply #49 on: September 29, 2015, 11:33:10 AM »

Great info.

Jack
Logged
Jack Byrd

Gaz

  • Sr. Member
  • ****
  • Posts: 423
  • Do no harm, take no sh!t.
    • 92 XR2, 01 LL Bean Outback, 92 Concours, 86 F150
    • Saint Cloud Exhaust
Re: What Size and Offsets
« Reply #50 on: April 09, 2016, 01:14:05 PM »

I have a set of 4 15"X6” 4X114.3mm  1983-1987 MAZDA 626 OEM "phone-dial" alloy wheels (Hollander #64639, Mazda P/N H076-89-376) with 205/50/15 Falken Azenis.  I'm not sure of the offset.  The clearance to the rear strut is very close, but it's never rubbed once, even when autocrossing.  The wheels look like they were made for the car.  The center caps from my 14X5.5 OEM '91 Capri wheels even fit (I liked the "blank" center caps better than the "Mazda" ones).  These wheels are pretty hard to find - I looked for a year to find a set.

Holy hell, I had these wheels, too! Put them on my N/A while my originals were getting painted.
Logged
Pages: 1 2 3 [4]