TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: quick question  (Read 2651 times)

bhazard

  • Sr. Member
  • ****
  • Posts: 337
quick question
« on: March 05, 2010, 01:10:00 PM »
How do I move a Capri with no CV axles? It seems the only thing holding the hub and rotor onto the knuckle is the caliper.
Logged
93 Festiva L, lotsa miles, BP+T/G25MR swap, Rocketchip
Best ET 12.99, Best MPH 109.8, 22\\" slicks
88 T-bird Turbo Coupe, 182k miles, slightly modded, 14.71 @ 92.4mph 2.02 60\\\', end of the road

azgtx

  • Old-Timer
  • *****
  • Posts: 548
quick question
« Reply #1 on: March 05, 2010, 02:11:00 PM »
You need an extra set of outer cv joints....just push them in from the back side and put an axle nut on good and snug...works like a charm.
Clay
Logged

bhazard

  • Sr. Member
  • ****
  • Posts: 337
quick question
« Reply #2 on: March 05, 2010, 03:46:00 PM »
Had someone tell me I could put a big bolt thru with some washers and a nut on the other side. Would that work? I don't know where I would get a pair of outer joints to use...
Logged
93 Festiva L, lotsa miles, BP+T/G25MR swap, Rocketchip
Best ET 12.99, Best MPH 109.8, 22\\" slicks
88 T-bird Turbo Coupe, 182k miles, slightly modded, 14.71 @ 92.4mph 2.02 60\\\', end of the road