TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

Summer will be upon us soon! Make sure you check the Meets subforum to see if there's a get-together near you!

Author Topic: quick question  (Read 2653 times)

bhazard

  • Sr. Member
  • ****
  • Posts: 337
quick question
« on: March 05, 2010, 01:10:00 PM »
How do I move a Capri with no CV axles? It seems the only thing holding the hub and rotor onto the knuckle is the caliper.
Logged
93 Festiva L, lotsa miles, BP+T/G25MR swap, Rocketchip
Best ET 12.99, Best MPH 109.8, 22\\" slicks
88 T-bird Turbo Coupe, 182k miles, slightly modded, 14.71 @ 92.4mph 2.02 60\\\', end of the road

azgtx

  • Old-Timer
  • *****
  • Posts: 548
quick question
« Reply #1 on: March 05, 2010, 02:11:00 PM »
You need an extra set of outer cv joints....just push them in from the back side and put an axle nut on good and snug...works like a charm.
Clay
Logged

bhazard

  • Sr. Member
  • ****
  • Posts: 337
quick question
« Reply #2 on: March 05, 2010, 03:46:00 PM »
Had someone tell me I could put a big bolt thru with some washers and a nut on the other side. Would that work? I don't know where I would get a pair of outer joints to use...
Logged
93 Festiva L, lotsa miles, BP+T/G25MR swap, Rocketchip
Best ET 12.99, Best MPH 109.8, 22\\" slicks
88 T-bird Turbo Coupe, 182k miles, slightly modded, 14.71 @ 92.4mph 2.02 60\\\', end of the road