TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

If you've registered make sure emails from TeamCapri are not landing in your spam folder!

Pages: 1 2 [3]

Author Topic: HOW-TO: Capri Wheel Bearings  (Read 17772 times)

azgtx

  • Old-Timer
  • *****
  • Posts: 548
Re: HOW-TO: Capri Wheel Bearings
« Reply #30 on: April 19, 2016, 09:46:18 PM »

My God man just get a tie rod end tool and pop it off.
Logged

Capritain

  • Jr. Member
  • **
  • Posts: 72
Re: HOW-TO: Capri Wheel Bearings
« Reply #31 on: August 08, 2016, 02:20:05 PM »

So, AGAIN! had time to take the knuckle apart.  I was observing how the bearing separator going to work.  When we get it separated how much would parts and pieces cost?  Which is reusable and replaced?

Two weeks ago there was one capri at the junkyard, yesterday I went and it was gone(crushed) I was hoping just to swap the whole kncuck assembly for $40 rather than take it apart and put it together.  Well, I have no choice but to do it now.

Autozone tools rental department, here I come.
Logged
91 CAPRAI N/A 5-Speed
D-town, Iowa

SHOwn

  • Sr. Member
  • ****
  • Posts: 287
    • 91 XR2
Re: HOW-TO: Capri Wheel Bearings
« Reply #32 on: August 09, 2016, 09:25:27 AM »

Hey captain, if your signature had a location, some of us might be able to suggest other locations for parts, or even sell you some from our own trove. For instance, I have a local yard that has 6 or 7 Capris and I know of one in Illinois that has more than ten.
Just trying to help
Ron
Logged
R. Powell
'91 XR2, LM 16" Chrome Drifters, White Gauge Faces, Kuhmo 40's, Big Brake UG, 2.5" Mandrel Bent CATback, BMW318 Heated Seats, `94 console, '99 Dodge Neon Spoiler, '94 XR2 Sideskirts Bumpers and taillights, Fresh Basecoat-Clearcoat Cardinal Red (Jul2014), vj11/vj14 hybrid, manual boost CTL.

Capritain

  • Jr. Member
  • **
  • Posts: 72
Re: HOW-TO: Capri Wheel Bearings
« Reply #33 on: August 09, 2016, 02:35:22 PM »

Hmmmm what happen to my signature? I had it once.
The thing is if it's ship is gonna be expensive.  I'm a cheap o.

I'll add my signature.
Logged
91 CAPRAI N/A 5-Speed
D-town, Iowa

Capritain

  • Jr. Member
  • **
  • Posts: 72
Re: HOW-TO: Capri Wheel Bearings
« Reply #34 on: August 12, 2016, 09:08:25 PM »

OMG indeed. I was too busy trying to figure out Matt's picture I missed "socket and a tap" for some reason I keep understanding I have to use a press to take it apart. Anyway, I got it out.  What MUST be replace?  Again I just took it apart to replace the broken lug nut.

My God man just get a tie rod end tool and pop it off.
Logged
91 CAPRAI N/A 5-Speed
D-town, Iowa

WashiestSnake

  • Old-Timer
  • *****
  • Posts: 570
    • 1991 Mercury Capri
Re: HOW-TO: Capri Wheel Bearings
« Reply #35 on: December 05, 2016, 07:46:58 PM »

Heres a good video of it, if you dont like write ups! https://www.youtube.com/watch?v=zPn_V_Jma_A&list=LLuXF3TZJJrf-7hvKp9WK26A&index=4
Logged
1991 Mercury Capri 68,xxx Miles--Project(AWD)
1996 Lincoln Continental -- The Boat(Given to my Brother)

azgtx

  • Old-Timer
  • *****
  • Posts: 548
Re: HOW-TO: Capri Wheel Bearings
« Reply #36 on: December 05, 2016, 09:28:15 PM »

I will surely guess he will be back in there again very soon. The bearing should not slip on the hub. The hub needs to be pressed into the bearing assembly. With the bearing and a slip fit it will be spinning on the hub and further eating at the hub. I did not see them checking the preload either..nor using a torque wrench. What a hack. Maybe he was just going to sell the car anyway. When you get you hub out check it for small heat checking cracks and replace them if needed. Doing this right will last another 80k miles.
Logged

WashiestSnake

  • Old-Timer
  • *****
  • Posts: 570
    • 1991 Mercury Capri
Re: HOW-TO: Capri Wheel Bearings
« Reply #37 on: December 06, 2016, 09:21:58 AM »

Yea he definitely half assed it.  I thought that himnusing a ziptie for the cv boot was a bit sketchy aswell.
Logged
1991 Mercury Capri 68,xxx Miles--Project(AWD)
1996 Lincoln Continental -- The Boat(Given to my Brother)

chrispoe

  • Sr. Member
  • ****
  • Posts: 396
    • 91 BP Capri GT
Re: HOW-TO: Capri Wheel Bearings
« Reply #38 on: December 09, 2016, 11:20:30 PM »

Yea he definitely half assed it.  I thought that himnusing a ziptie for the cv boot was a bit sketchy aswell.

Just watched the video, they didnít use zip ties.
They used real CV boot clamps.
Logged

WashiestSnake

  • Old-Timer
  • *****
  • Posts: 570
    • 1991 Mercury Capri
Re: HOW-TO: Capri Wheel Bearings
« Reply #39 on: December 10, 2016, 12:37:31 PM »

Ah, I hadnt seen that video in months. I was reminded to post it because I just had re-watched his oil change video, because I forgot how to get to the oil filter. I had the bearing change video saved on my youtube, for whenever my bearings went out.
Logged
1991 Mercury Capri 68,xxx Miles--Project(AWD)
1996 Lincoln Continental -- The Boat(Given to my Brother)

jiml

  • Newbie
  • *
  • Posts: 1
    • 94 Capri
Re: HOW-TO: Capri Wheel Bearings
« Reply #40 on: July 04, 2018, 06:27:23 PM »


It sure does look like you put the inner seal on backwards. :) Maybe it's the photos but look at #3 and #11 and compare.

I completely agree!....   Not sure if there is any impact, as far as the bearings seating correctly, but will leak from both sides eventually
« Last Edit: July 04, 2018, 07:46:03 PM by jiml »
Logged
Pages: 1 2 [3]