Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bhazard]

As it says I will be parting out my 93 Xr2. Not exactly right now, its the middle of winter, but the plans are to swap into my 93 Festiva. The Xr2 has a rusted floor and subframe.

I will need the engine, trans, ecu, wiring, and maybe the front and rear brake setup. I would like to use as much of the Capri on the Festiva as I can. All the "capri specific" parts will be up for grabs. The top is decent, but not perfect. Though Im not gonna pull the top off while theres still an interior in the car. Thats pretty much how the rest of the car is as well.

So just give me an idea of what you guys want and Ill try to get it off the car as soon as I can. Small things like lights and switches are probably easier than bumper covers and things like that.

 

[CapriTypeR]

I'd be interested in the wheels and center caps, wing, roof latches, window switches, fog lights, fog light switch and relay. Perhaps the interior if the leather is decent.

Feel free to email me with a price! Cougar1prod@comcast.net

--Russ

[bhazard]

The wheels I *might* end up using on the festiva, but they do have newish kumho ast's. One of the center caps doesnt have the ring that snaps it onto the wheel, it stays on but rattles.

Wing is good, I may be able to pull it soon.

Roof latches will probably have to wait, I dont wanna ruin the interior before I get rid of it.

Window switches I can probably do soon.

The passenger side foglight is missing but everything else is good otherwise.

Interior is cloth and the seats are a little worn. Dash is nice if I remember though.

[blue93]

I'm looking for the right and left hinged flaps located at the front of the convertible top cover, if the hinges are still intact.  Those would be the pieces of vinyl that lift up at 45 degrees when you raise your top.  I'd also be interested in the under-bumper spoiler - another piece of vinyl, located at the base of the bumper.  Thanks.

[bhazard]

I only have that flappy thing on the passenger side. Not sure how the chin spoiler is but ill look sometime.

[Gostlrs]

drivers side window regulator?

[bhazard]

How hard is it to pull?

[Gostlrs]

3 or 4 bolts and window is out, then drill out the 3 rivets that hold in the motor then like 2 more bolts.

i had 3 out in about 1 hour...

step by step here..

http://www.techcapri.com/PDF/Repair/Capri_SM_Glass_Frames_Mechanisms_S01-11.pdf

i sent u a PM earlier

[bhazard]

It'll have to wait til I can have the car out of the weather then, dont wanna ruin the interior.

[Gostlrs]

just put some wood blocks under the glass, thats what i did to the one i have in my back yard?

[bhazard]

Probably could do something like that. The biggest problem right now is that its the middle of winter and the car is half an hour away at my dads :/

PS middle of winter meaning 20 degrees or colder not 80+ like in phoenix  

[nepacapri]

How's the passenger side clear turn signal lens and housing?  Mine has a cracked lens and the light socket is all melted.

I could also use an original radio if it's any good.

[Gostlrs]

well let me know what u can do, your my last hope, otherwise i have to get it online and pay out the butt....

good thing i picked up my truck today so it can sit until i find one..

total of 7 capris here in phoenix..not one was good or there

[CapriTypeR]

If he can't do it, contact James Whitt. He offers regulators at a great price, with a warranty.

(334)343-6094
JEWHITT@yahoo.com

Just tell him I sent you!

--Russ

[Gostlrs]

already did, we been emailing back and forth