TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

If you've registered make sure emails from TeamCapri are not landing in your spam folder!

Author Topic: speed omteter cable  (Read 4361 times)

bryanknight

  • Sr. Member
  • ****
  • Posts: 300
    • 91 foxboy modified, 91 capri xr2 modified,
speed omteter cable
« on: October 09, 2009, 04:20:00 PM »

i need one the lower half or the hole thing for 91xr2 if anyone has one please contact me  with the price...

rcicustoms

  • Old-Timer
  • *****
  • Posts: 790
    • http://google
speed omteter cable
« Reply #1 on: October 09, 2009, 05:13:00 PM »

ive been looking for one for months with no avail ... you find em buy em up there very hard to obtain....i need one too ...whole cable...
Logged

220hp@18psi

Gostlrs

  • Old-Timer
  • *****
  • Posts: 2433
speed omteter cable
« Reply #2 on: October 10, 2009, 04:48:00 AM »

what is the problem with your? did the tab snap? if so i repaired mine with a piece of sheetmetal. i cut a hole big enough screw the cable back on the the speed sensor. then drilled a hole for the screw. i used a 1/4 nut as a spacer and it fits perfect. no leaks at all.

i do have a XR2 cable but i am keeping it around just in case. like you said they are golden!

as for NA 5 speeds. i got 2 of them if anyone one needs one.

i will go take a photo now so you can see. no leaks at all once i did this.
Logged
Current Rides
2015 Nissan Frontier
2015 Chrysler 300
1990 240sx (SR20DET Swapped)
1992 240sx Convertible

Gostlrs

  • Old-Timer
  • *****
  • Posts: 2433
speed omteter cable
« Reply #3 on: October 10, 2009, 04:55:00 AM »

took me about 5 minutes to make and you can see the surrounding areas are still dry. been running this about 5 months i would guess

 
Logged
Current Rides
2015 Nissan Frontier
2015 Chrysler 300
1990 240sx (SR20DET Swapped)
1992 240sx Convertible

bryanknight

  • Sr. Member
  • ****
  • Posts: 300
    • 91 foxboy modified, 91 capri xr2 modified,
speed omteter cable
« Reply #4 on: October 10, 2009, 07:36:00 AM »

no my cable broke right up from the trans mont about three inchs up in side i was going to try and fix it with the stuff at work but i get get to that  that far up inside the cable

Gostlrs

  • Old-Timer
  • *****
  • Posts: 2433
speed omteter cable
« Reply #5 on: October 10, 2009, 11:10:00 AM »

show me a photo...

the cable should work from a NA. the speed sensor is different. if thats the case then i think i can help you out....
Logged
Current Rides
2015 Nissan Frontier
2015 Chrysler 300
1990 240sx (SR20DET Swapped)
1992 240sx Convertible