TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

If you've registered make sure emails from TeamCapri are not landing in your spam folder!

Author Topic: started to do visual inspection and  (Read 2235 times)

mrbill

  • Newbie
  • *
  • Posts: 18
started to do visual inspection and
« on: February 11, 2010, 01:09:00 PM »

Found out that there was no fuel pressure in the system, further inspection revealed that all 4 injectors were loose and I belive not seated properly, everything else connected to them was tight, so going to install new seals and see if they sit a little tighter, wondering if I should have them tested also?
Logged
william fuller