TeamCapri

Please login or register.

Login with username, password and session length
Advanced search  

News:

New & potential members - due to overwhelming spam registrations, it's been very hard to sort through new registrations. If your account has not been approved, check your spam folder! If not please contact us at admin[AT]teamcapri.com and we'll sort it out for you.

Author Topic: started to do visual inspection and  (Read 2248 times)

mrbill

  • Newbie
  • *
  • Posts: 18
started to do visual inspection and
« on: February 11, 2010, 01:09:00 PM »
Found out that there was no fuel pressure in the system, further inspection revealed that all 4 injectors were loose and I belive not seated properly, everything else connected to them was tight, so going to install new seals and see if they sit a little tighter, wondering if I should have them tested also?
Logged
william fuller