Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Heavensheros]

i just too the dryer/receiver out took the parts out of the box and put the box back... there was a small box attached to the receiver that plugs in ... do i need that ?

[Heavensheros]

bump

[Gostlrs]

i do nto see the need if it was the one to the blower. i just got back with your pipe. too late to get to the post office so i will have to get it out monday. i will send pics of it later

[Heavensheros]

The box im talking about was on the reciever it sais nd nippondenso... i took out the ac do i need that ?

[Rocketman]

What exactly is your problem? I removed all the A/C equipment from the engine bay including the relays and wire harness. I did not touch anything under the dash.

[Heavensheros]

well under the dash there is a Box that was connected to the evaporator that sais nippondenso on it and it goes to part of the wiring from outside and i was wondering if i need that box ... from my manual it looks like it is the a/c control amp. and if i can remove this i can cut the wires that go from the outside engine bay to the cabin connecting this box.

[Heavensheros]

and how did you remove the wire harness and relays cut ? or do they all come out somehow cleanly.

[Gostlrs]

i say as long as it is A/C only and does not use it for the heater...remove it

i plan on taking out all the extra stuff in the engine bay when i paint/replace my engine and plan on all the crap inside when i remove the dash to paint it.

you are ahead of me on that one

[Heavensheros]

let me know what useless stuf you take out of the engine bay so i can do the same lol